DRAGOON space heater is a machine that generate heat from combistion of wood and coal, directly to surounding space (without any fluids in process) by the blow of hot air. Therefore there is no need of use a central heating installation. Flumes from the combustion process are ducted out through the chimney.
Heaters are delivered as a complete appliance ready to use after connecting to the power of 230V and attaching the duct to the chinmey (so the flumes can be pulled out).
Construction:
Casing made from stainless steel on an aluminium chasis
Round combustion chamber made from heatproof steel
Round heat exchanger made from stainless steel
Easy to use rotating eye with adjustable fins for air distribution
Thermostat - to control the fan
On/Off Control panel
Advantages:
Combustion chamber made from heatproof steel - fully closed and secured (fumes are ducted out by the flue)
Quiet and very efficent centrifugal fan (from 2500 up to 5000 m³/h)
Heat power 35 or 70 kW
Included thermostat with fan control. After setting the desired temperature (between 0 and 90 oC) thermostat will check the temperature in air outlet and turn on the fan automaticly.
You can use up to 10 meters of air duct in straight line if the diameter of air duct and air outlet is the same.
Rotating eye with air outlet - you can direct the the hot air in any direction and height.
Casing made from stainless steel on an aluminium chasis
Off switch build in the machine - do not disconnect power when the heater is working, the cumulating heat energy can damage combusion chamber or heat exchanger
Easy installation - ready to use after connecting to the power of 230V and installing air duct to the air outlet
Fuel: wood or coal - wood can not be contaminated - combustion chamber can be filled to the half of capacity
Small weight of unit: 150 and 285 kg
Use:
To heat halls, workshops, warehouses, agricultural objects etc. Possibility of recovery wood wastage, coal and cardboards make heater cheap and effective way to heat surrounding space.
